Charge-discharge Behavior of Surface-coated LiMn2O3.95F0.05 Cathode Materials at High Temperature

With inorganic salts such as LiNO3, Li2CO3, surface-coated LiMn2O3.95F0.05 were prepared by melt-impregnation method. When these surface-coated LiMn2O3.95F0.05 were used as cathode materials, their charge-discharge characters were carefully compared. As a result, they exhibited good charge-discharge properties at 50℃ high temperature. Especially, LiNO3 surface-coated LiMn2O3.9F50.05 retained nearly 80% initial reversible capacity after 130 cycles at 50℃.     

Characterization of Nested Hollow Inorganic Fullerene-like Tungsten Disulfide Nanoparticles Prepared by Solid-Gas Reaction

Non-carbon inorganic fullerene-like(IF) nanoscale materials have recently attracted intense interest due to their nested hollow and nanotube structures,In this letter,IF-WS2 nanoparticles prepared by solid-gas reaction were characterized by X-ray diffraction,Scanning electron microscopy and transmission electron microscopy.The results show that the IF-WS2 nanoparticles have a nested hollow closed spherical structure with diameter of 100-150mm.     

Retention of ionizable compounds on high-performance liquid chromatography. VII. Characterization of the retention of ionic solutes in a C18 column by mass spectrometry with electrospray ionization

The elution of ions from a C₁₈ column with mobile phases containing methanol (60%, v/v) and aqueous buffers is studied by mass spectrometry. It is demonstrated that the anions are excluded from the stationary phase by the ionized silanols. However, the ionized silanols interact strongly with cations, which are retained in the column. These cations are later eluted from the column by ion exchange with the cations present in the pH buffered mobile phase. The size of the ions, the mobile phase cation concentration and the mobile phase pH are the main parameters that affect elution of the retained cations. It is also demonstrated that there are at least two different types of ionizable silanols, with different acidities, that contribute to the retention of cations. An estimate of the pK_a values of these two groups of silanols in 60% methanol is given.     

Large heteropolymetalate complexes formed from lanthanide (Y, Ce, Pr, Nd, Sm, Eu, Gd), nickel cations and cryptate [As4W40O140]: synthesis and structure characterization

A new family of heteropolytungstate complexes (NH₄)₂₁[Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·xH₂O(Ln=Y, Ce, Pr, Nd, Sm, Eu, Gd) were prepared by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O with NiCl₂·6H₂O and Ln(NO₃)₃·xH₂O at pH≈4.5. The crystal structures of (NH₄)₂₁[Gd(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·51H₂O was determined by X-ray diffraction analysis and element analysis. The compound crystallizes in the monoclinic space group P2₁/n with a=19.754(3), b=24.298(4), c=39.350(6) Å, β=100.612(3)°, V=18564(5) ų, Z=2, R1(wR₂)=0.0544(0.0691). The central site S1 and two opposite sites S2 of the big cyclic ligand [As₄W₄₀O₁₄₀]²⁸⁻ are occupied by one Ln³⁺and two Ni²⁺, respectively, each site supply four O_d coordinating to metal ion, another one water molecule and other five water molecules coordinate, respectively, to Ni²⁺and Ln³⁺. Polyanion [Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]²¹⁻ has C_2v symmetry. IR and UV–vis spectra of [NaAs₄W₄₀O₁₄₀]²⁷⁻ of the title compounds are discussed.     

Inter-element interferences in the determination of arsenic and antimony by hydride generation atomic absorption spectrometry with a quartz tube atomizer

The interferences between arsenic and antimony on each other during the hydride generation atomic absorption spectrometry (HGAAS) determination of arsenic and antimony using a quartz tube atomizer (QTA) were examined. In order to eliminate or reduce such interferences by selective heat decomposition of arsine and stibine, a Pyrex adsorption U-tube trap containing glass wool was placed between the drying tube and the quartz tube atomizer. Although at 250 °C stibine decomposes and is held almost completely by the trap, arsine is also decomposed to an extent of 24% and, therefore, thermal decomposition is not useful to eliminate antimony interference on arsenic determination. The effect of coating the glass wool in the U-tube with antimony on the arsenic suppression of the antimony signal was studied. The results showed that the antimony coating in the U-tube could not hold arsenic effectively and its interference on the antimony signal could not be eliminated by this means. In the second part of the study, oxygen was supplied to the quartz tube atomizer during atomization in order to study the effect of supplying oxygen on the antimony signal and on the interference of arsenic in the antimony determination. Sensitivity was increased in the presence of oxygen and interferences of arsenic on antimony determination was decreased by about 10% when oxygen was supplied. It was also observed that the extent of interferences depended mainly on the interferent concentration rather than the analyte concentration.     

Rapid speciation of Se(IV) and Se(VI) by flow injection–capillary electrophoresis system with contactless conductivity detection

A flow injection–capillary electrophoresis system with contactless conductivity detection and hydrostatic-pressure-generated flow was used for the fast and sensitive speciation of Se(IV) and Se(VI). The sample throughput was 25 samples per hour using a background electrolyte solution containing 8.75 mM l-histidine (His) adjusted to pH 4.00 with acetic acid. The repeatability of peak areas (n=8) was better than 1.41% and the limits of detection were 190 g L^–1 and 7.5 g L^–1 for Se(IV) and Se(VI), respectively. The interference from carbonate, typically present in water samples, was eliminated by using a low-pH electrolyte in which carbonate is uncharged and migrates at the EOF front. The method was applied to the analysis of Se(IV) and Se(VI) in soil samples that were spiked with both selenium species and the results for recovery of both selenium species were in good agreement with their introduced concentrations.     

Determination of arsenic(III) and total inorganic arsenic in water samples using an on-line sequential insertion system and hydride generation atomic absorption spectrometry

A simple and robust on-line sequential insertion system coupled with hydride generation atomic absorption spectrometry (HG-AAS) was developed, for selective As(III) and total inorganic arsenic determination without pre-reduction step. The proposed manifold, which is employing an integrated reaction chamber/gas-liquid separator (RC-GLS), is characterized by the ability of the successful managing of variable sample volumes (up to 25 ml), in order to achieve high sensitivity. Arsine is able to be selectively generated either from inorganic As(III) or from total arsenic, using different concentrations of HCl and NaBH₄ solutions. For 8 ml sample volume consumption, the sampling frequency is 40 h⁻¹. The detection limit is c_L = 0.1 and 0.06 μg l⁻¹ for As(III) and total arsenic, respectively. The precision (relative standard deviation) at 2.0 μg l⁻¹ (n = 10) level is s_r = 2.9 and 3.1% for As(III) and total arsenic, respectively. The performance of the proposed method was evaluated by analyzing the certified reference material NIST CRM 1643d and spiked water samples with various concentration ratios of As(III) to As(V). The method was applied for arsenic speciation in natural waters samples.     

On-line concentration of s-triazine herbicides in micellar electrokinetic chromatography using a cationic surfactant

A new method for the simultaneous determination of anions (sulfate, nitrate, and chloride) and cations (sodium, ammonium, potassium, magnesium, and calcium) in acid rain waters was investigated using high-performance ion-exclusion/cation-exchange chromatography with conductimetric detection on a separation column packed with a polymethacrylate-based weakly acidic cation-exchange resin in the hydrogen-form and an eluent comprising 1.5 mM sulfosalicylic acid–6 mM 18-crown-6 at pH 2.6, operated at 1.5 ml/min. Effective separation and highly sensitive conductimetric detection for the anions and the cations was achieved in about 14 min. Since the ionic balance (equivalents of anions/equivalents of cations) of acid rain waters of different pH (4.40–4.67) ranged from 0.97 to 0.94, evaluation of the water quality of acid rain was possible. This method was successfully applied to the simultaneous determination of the anions and the cations in acid rain transported from mainland China and North Korea to central Japan monitored by a meteorological satellite data analyzer.     

Determination of As(III) and As(V) ions by chemiluminescence method

A new chemiluminescence (CL) method for the selective determination of As(III) and As(V) ions in aqueous solution has been studied using a FIA system. The method is based on the increased CL intensity with the addition of As(V) ion into a solution of lucigenin and hydrogen peroxide. The addition of As(III) ion into the solution did not change the CL intensity. Total concentration of As ions was determined after pre-oxidation of As(III) to As(V) with hydrogen peroxide in basic solution. The As(III) content was estimated by subtracting the content of As(V) ion from total As concentration. The effects of concentrations of KOH and H₂O₂, and flow rates of reagents on CL intensity have been investigated. The calibration curve for As(V) ion was linear over the range from 1.0×10^-2 to 10 μg/g, the coefficient of correlation was 0.997 and the detection limit was 5.0×10^-3 μg/g under the optimal experimental conditions.     

On‐Line Determination of Arsenic Species in Sea Water by Selective Hydride Generation Coupled with Inductively Coupled Plasma — Mass Spectrometry

A method for direct de termination of total in organic arsenic (III+V), arsenic (III) and dimethylarsinate (DMA) in sea water was developed by combining continuous‐flow selective hydride generation and inductively coupled plasma mass spectrometry (ICP‐MS) is presented. The principle underlying selective hydride generation is based on proper control of the reaction conditions for achieving separation of the respective arsenic species. The effects of pH and composition of reaction media on mutual interference between the arsenic species were investigated in detail. The results indicate that the appropriate media for the selective determination of total in organic arsenic, DMA and As(III) are 6 M HNO₃, acetate buffer at pH = 4.63 and citrate buffer at pH = 6.54, respectively. The concentrations of total inorganic arsenic species, As(III+V), and As(III) were respectively deter mined and that of As(V) was obtained by the difference between them. As to the concentration of DMA, it was obtained after correction from the interference caused by As(III) and As(V). By following the established procedure, the detection lim its (as based on 3‐sigma criterion) for As(III+V), As(III) and DMA were 0.050, 0.009, and 0.002 ng/mL, respectively. There liability of the pro posed method was evaluated in terms of precision and spike addition. The results indicated that the precision of better than 3% and spike recovery of 95 to 105% for all the arsenic species tested in the natural sea water samples can be obtained.